Using Spark CAB

Last modified on: 3/15/2024, 5:41:37 PM

This page describes how to use the Positive Grid Spark CAB with Spark amps, as a PA or as an output to a PA system.

Using Spark CAB with Spark Amps

Step 1 Make sure Spark CAB is powered OFF and the levels are turned down.

Step 2 Connect your Spark amp Headphone / Line Out to Spark Input of Spark CAB using the supplied 3.5mm Audio Stereo Cable. Also make sure the Input selector is in the Spark Input position

Step 3 You can charge your USB-C powered Spark amp using the USB-C Charge Out or power your Spark 40 using the DC Out.

Step 4 Turn on your Spark amp and then Spark CAB. You can now adjust the volume on Spark CAB as needed.

Using Spark CAB as a PA Speaker

Step 1 Make sure Spark CAB is powered OFF and the levels are turned down.

Step 2 Connect the source's main output to the XLR/TRS Combo Input of Spark CAB. Also make sure the Input selector is in the XLR/TRS position.

XLR Input

Step 3 Turn on the source and then Spark CAB. You can now adjust the volume on Spark CAB as needed.

Using Spark CAB as an Output to a PA System

Step 1 Make sure the Line Out Volume of Spark CAB and the levels of the PA system are turned down.

Step 2 Connect the Output of Spark CAB to the input of the PA System.

Step 3 You can now start adjusting the Line Out volume of Spark CAB and the levels of the PA system as needed.

Was this page helpful?